ОСП тока студија случаја коришћења Мосс, СПД, ИнфоПатх & веб сервиси.

Преглед

This entry describes a case study describing an actual MRO (Maintenance, Repair and Operations) workflow approval process implemented in MOSS.

This is not an overtly technical discussion, but instead serves to provide a real-world example that demonstrates how the MOSS platform met a real-world need.

(This entry is cross posted between http://paulgalvin.spaces.live.com и http://blogs.conchango.com)

Позадина

The client’s MRO process had been characterized by the following

  • Manual approval process.
  • Some support using excel spreadsheets.
  • Irregular approval process. The same MRO purchase approval process would vary day to day, person by person.
  • Lots of paper and hand-written signatures — purchase requisitions required up to 3 written signatures before final approval.

The objectives of this project included:

  • Fully automate the process.
  • Enforce enterprise standards for approval.
  • Provide consolidated view of MRO purchasing to various managers.
  • Detailed audit trail.

As a side effect of the solution, written signatures were no longer required.

Approval Process

The approval process consists of four "swim lanes": Originator, Direct manager, Functional manager and division manager.

Originator:

Sees the need for the purchase and starts the process. Note that the originator may or may not actually enter the purchase requisition, but instead direct another staff member to do so. Неки пута, the originator does not have the technical expertise to fill out the PO requisition. На пример, a user may want to requisition a new laptop computer, but does not know the best vendor, IT standards, итд. У овом случају, the originator works with IT and IT actually fills out the requisition.

Direct manager:

This is the direct manager of the originator (which may be different from the person who actually entered the PO requisition into MOSS). Direct managers must approve the PO requisition before the system seeks approval further down the line.

Functional Manager:

The functional manager is the individual responsible for ensuring that the proposed purchase conforms to enterprise standards within the scope of a particular corporate function. На пример, IT purchases are approved by an IT functional manager.

Division Manager:

Division managers approve purchase requisitions strictly by dollar amount. Division manager approve purchase requisitions in excess of a configurable dollar amount.

The Solution

We used the following tools and components to implement the solution:

МОСС: Serves as the platform off which everything else "hangs". MOSS provides bedrock services for security, master data, audit trails and other features.

InfoPath forms services: A MOSS component, this enables users to fill out purchase requisitions via a web browser.

СхареПоинт Десигнер (СПД): We used SPD to implement the automated workflow process.

Web Service: A c# web service enhances the user experience by enabling cascading selections lists in the InfoPath form and provides better performance with respect to filtering data. Видети овде for a technical deep dive on this subject and our reasons for using it.

Custom Lists: MOSS user profiles provided a given user’s direct manager, but did not provide most of the data that controlled workflow decisions (e.g. whether the divisional manager is required to approve the PO requisition). We used custom lists in an "Enterprise Data" site to maintain data such as "Divisional Manager Approval Dollar Amount", "Functional Area Manager" and so forth. Lists integrated very nicely with InfoPath and also provide create/update/delete (Цруд) functionality with auditing and security out of the box.

Use Case

This use case illustrates how the solution fits together:

  1. Paul wants a new laptop. He describes his needs to Vivek, an IT person familiar with corporate laptop standards, preferred vendors, итд.
  2. Vivek logs into MOSS, accesses the PO Requisition form and enters the requisition on behalf of Paul. The form prompts Vivek for a purchase category which then uses the web services to populate a drop-down list of company-approved vendors. Vivek also specifies the corporate functional area of this purchase (e.g. "IT" or "Finance").
  3. SPD based workflow starts, determines Paul’s direct manager and routes the requisition to his manager, Stacy.
  4. Stacy approves the purchase requisition.
  5. SPD workflow inspects the requisition and determines it’s an IT purchase. It routes the workflow to the IT functional manager, Wonson.
  6. Wonson approves the requisition.
  7. SPD workflow again inspects the requisition and determines that the purchase amount exceeds a maxium dollar amount and routes it to the division manager for approval.
  8. The division manager approves the purchase requisition.

Белешке

  • The use case demonstrates a "clean" run with no rejections or jumps.
  • Every approver has the ability to approve or reject the requisition as well as provide written comments. These are logged in the audit trail.
  • If a responsible manager rejects the purchase requisition at any point, the PO requisition is "dead" and the process must be started from the beginning.
  • Workflow notifies the originator at every step of the process.
  • No written signatures — the client determined (after some forceful recommendations) that the audit trail as provided via workflow history, served their auditing needs.
  • Effort — it took approximately three man weeks to implement this solution.

Conclusion

This solution leverages MOSS as a development and run-time platform. The client was able to leverage core MOSS features to automate a routine business process that affected nearly every employee in the company. With the exception of a simple web service (which itself leverages MOSS), almost no actual "programming" was required.

The solution also serves as a "showcase" for the client, demonstrating how different MOSS features can be combined to create a fully featured business application and generate new consulting opportunities in the future.

Glossary

MRO: Maintenance, repair and operations. These purchases typically include items such as notepads, chairs, personal computers, printers, cell phones and the like.

Испит 70-542: Студијска препоруке (Мицрософт Оффице СхареПоинт Сервер 2007 – Развој апликација)

УПДАТЕ: У коментарима, Неко је ставио овај линк: http://www.midnightmonkey.co.uk/blog/blogging/?page_id=5. It looks good to me too.

Положио сам испит данас МОСС техничку, entitled "Microsoft Office SharePoint Server 2007 – Application Development". I found the exam to be pretty rigorous and that it matched up quite well with Microsoft’s Припрема за употребу.

Радио сам са маховином на дневној бази и ништа откуцаја стварни практично искуство за све ове испите.

То је рекао, I took note of what I was studying as I studied. I believe that all of these resources are helpful, нарочито као средство јачања да стечено искуство.

Предмет Линк
Екцел Сервицес http://msdn2.microsoft.com/en-us/library/ms519581.aspx
Претражи No special recommendation. I had taken a class on search earlier this year and real-world experience carried me through. Work with the "search center" компонента од маховине.
БДД http://msdn2.microsoft.com/en-us/library/ms563661.aspx
Публика http://msdn2.microsoft.com/en-us/library/ms496822.aspx
Профили http://msdn2.microsoft.com/en-us/library/ms496822.aspx
Садржај Мгмт http://www.sharepointblogs.com/tonstegeman/archive/2007/02/01/moss-custom-policies-part-1-creating-a-custom-information-management-policy.aspx

http://blogs.msdn.com/ecm/archive/2007/03/04/customize-the-page-editing-toolbar-in-moss-2007.aspx

http://msdn2.microsoft.com/en-us/library/aa674506.aspx

БИ Руке на раду са КПИ је у МОСС.
Ток http://msdn2.microsoft.com/en-us/library/aa830816.aspx
Информације мгмт http://msdn2.microsoft.com/en-us/library/bb397403.aspx
Варијације http://aspnetcoe.wordpress.com/2007/02/09/customize-variation-root-landing-logic/
Записи мгмт http://blogs.msdn.com/recman/archive/2006/06/16/633393.aspx
ИнфоПатх http://msdn.microsoft.com/msdnmag/issues/06/08/infopath2007/default.aspx

Многи од тих линкова довело до још линкова и ја тежили да их прате до око 3 нивоа дубине.

Не бих рекао да је све што сам прочитао директно на испиту, али не жалим читање било од тога, па чак и ако се неки битови нису директно релевантни. Све је добра ствар да знате, а ја препоручујем материјал за све теже добро заобљених маховина програмере.

Мосс / ВСС Пронађено (и датавиевс): видите сирове КСМЛ податке

То може бити очигледно да многима, али док је студирао за мој испит МОСС програмирања, Сазнао сам да је прилично лако да се стварни КСМЛ из упит претраге путем корисничког интерфејса.

Један брзи метод је следећи:

  • Приступ напредну претрагу.
  • Обавите претрагу која враћа неке податке.
  • Уређивање странице (преко сајта подешавања).
  • Промените КССЛ на следеће:

<?КСМЛ верзија="1.0" кодирање="УТФ-8"?>
<
клс:стиловима верзија="1.0" КСМЛнс:клс="хттп://ввв.в3.орг/1999/КССЛ/Трансформ">
<
клс:излаз метод="КСМЛ" верзија="1.0" кодирање="УТФ-8" увући="да"/>
<
клс:шаблон меч="/">
<
унапред>
<
клс:копија-у изабрати="*"/>
</
унапред>
</
клс:шаблон>
</
клс:стиловима>

  • Хит примењују.
  • Виев Соурце у бровсеру.

Имајте на уму да <унапред> tag doesn’t do much except serve as a convenient marker when you view the results.

This trick can be very helpful when working with managed properties and customizing search. It will provide a definitive list of the XML available for you to use in your xslt which would have been very helpful the last 25 пута сам створио неке прилагођене резултате претраге.

То би требало да раде, као и за датавиевс, мада нисам тестиране да је од још.

Нема ЦКВП за ВСС? Покушајте ово…

Видим да Ериц Краус was faced with a requirement normally met with a content query web part. Проблем? He was in a pure WSS environment with no access to the CQWP. Rather than curling up in the fetal position (нагон морам да се борим сваки дан, изгледа), he came up with solution that at least gives WSS shops a fighting chance to succeed. It’s described овде.

Бриљантно и детаљан приказ управљања садржајем АПИ

Stefan Goßner has put together a terrific 4-part series on the SharePoint Content and Deployment API овде. It offers a great overview and very good examples in code (C#).

I first picked up this link from joris poelmans blog at http://jopx.blogspot.com/.

Even if you’re like me, in that you have not had to do much hands-on work for content management, this is well worth 20 minutes of your time to read.

Using the API, one can:

  • Export and import content very easily.
  • Re-parent content. If you want to export some content from a site "A" and send it to site "B" but in a totally new place in the hierarchy, this is possible.
  • Export content from a site A and import selected bits into site A.
  • Re-link content (meaning deal with all the hyperlinks).

ВСС, доц либс & Листе, Израчунате колоне укључују [Ме]

Someone on the Internets was asking about how to create a calculated column on a list that would show a value formatted as "[Корисник] – [Статус] – [Локација]" as in "Paul Galvin – Алкохол [бесплатно] Пиво – The Beach".

Paul would go in and update his entry in the list and the calculated column would update appropriately. The [Корисник] треба бити додељена кориснику улази / ажурирање листе.

A calculated column cannot use "volatile" функције, као што су [Ме] или [Данас]. I solved it in a test environment with these steps:

  1. Create a text column named "Current User".
  2. Поставите своју вредност подразумевану [Ме]
  3. Create a calculated column called "Calc Test".
  4. Поставите своју вредност = [Тренутно корисника]

Отишао сам у, додао ставку на листи и то је радио.

Положен МИ 70-315 испит данас!

I passed the "Developing and Implementing Web Applications with Microsoft Visual C# .NET and Microsoft Visual Studio .NET" exam today in the great state of NJ at the venerable offices of SolarTech in Hasbrouck Heights.

I put this exam up there with BizTalk in terms of difficulty. You can’t fake your way through it.

To study, I used the the MCAD/MCSD Self Paced Training kit book entitled Developing Web Applications with Microsoft Visual Basic .NET and Visual C# .NET.

Microsoft guidelines (овде) are exactly correct IMO. The book addresses everything and if you have a modicum or real-world experience, it should be a straight-forward exam. If not, take the time get some real world experience or at least execute the labs in the book. That will probably give you what you need.

I even go so far as to recommend the book to pro’s, especially self-taught people like myself. It covers some basic stuff which I just never had a reason to stumble upon in my travels and I’m kicking myself a little bit for never having taken the time to learn them.

СхареПоинт Десигнер, “Прикупља податке корисника” и коришћење тих резултата.

Use the "Collect Data from User" action to create and assign a task to a user that prompts them for data. Among other things, Ја сам га користио да подстакну корисника да одобри или одбије захтев и унесите неке коментаре.

Ова акција има облик:

Прикупити подаци из овај корисник (Излаз за Варијабла: цоллецт1)

Ако кликнете на подаци кретао низ дијалозима где сте одредили које податке корисник треба да обезбеди, када завршетка рада и овај корисник је очигледна.

Излаз део (Варијабла: цоллецт1) saves the ID of the task. You use this in your workflow to extract the user’s actual response via the "Compare any data source" condition.

То стање показује као

Ако поље једнако вредност

Кликните на поље а онда ф(к) icon and it pulls up another dialog box. Use this generalized dialog box to to tell SPD two things;

1. What is the list and column whose value you want to compare.

2. Како би ток посла мотор пронађите специфичан ред у ту листу?

Да бисте то урадили:

  1. Change the "Source" dropdown to point at the correct task list. Note that the dialog box expands to show a "Find the List Item" одељак.
  2. У проналажење Детаљи области падајућег, изаберите име поља чију вредност желите (то пресликава се оно што се зове у дијалогу прикупља податке из горе).
  3. In the "Find the List Item" одељак, select "Tasks:ИД" у области падајућем.
  4. У поље Валуе, кликните на ф(к). This opens yet another dialog box.
  5. Change the source "Workflow Data"
  6. Select the workflow variable that matches to the "Output to Variable" прикупља податке из акције.
  7. Кликните на ОК / ОК и готови сте.

Изгледа да је ово за мене:

слика

У овом тренутку, сада можете користити ту вредност у радни процес као што се захтева.

Додатне напомене:

Као кратак страну, I always create an appropriately named workflow variable of type "List Item ID" and use that instead of the auto-generated "collect1".

This "compare any data source" Дијалог користи на више места у СПД-а вреди овладавање.

== Крај

Тецхнорати Тагс:

Прекидајући ТЈ пада када приступа документима у ВСС / МОСС библиотеку докумената

I’ve been plagued by this for 9 months and I see that people on the MSDN and Usenet forums have it too.l

Понекад, when accessing a word document (or other doc types) from a document library causes Internet Explorer to simply crash and go away (taking all the tabs with it if any are open).

This MS hotfix may solve it: http://support.microsoft.com/kb/938888

Такође, there’s some description about the problem here:

http://jopx.blogspot.com/2007/07/solving-internet-explorer-crash-when.html

Да ли ће стварно КСПатх корак напред?

Преглед:

Created a custom list that manages a content type with some dozen columns.

Added it to a page and then via SPD, converted into a data view.

Проблем:

My Xpath expression was returning blank for a column named "Current Position". I referenced it thusly:

    <table border="1">
      <клс:for-each select="/dsQueryResponse/Rows/Row" >
        <тр>
          <тд>
            Current Status:
            <клс:value-of select="@Current_x0020_Status"></клс:вредности од>
          </тд>
        </тр>
      </клс>
    </табела>

The column in the CT is named "Current Status". It shows up in the lookup as "Current Status". Everywhere you look, you see "Current Status".

While thrashing madly about, looking for a solution, I instead referred to "@Recruiter" and behold! — that actually returned back the current status. I expected it to return back the recruiter when I did that.

Решење:

I poked about in SPD. Go to that page in SPD and it shows the data view. You can inspect the actual data provided to the view and associated Xpath. Here I found out that indeed, the Xpath pointed at "Recruiter". Strangely enough, the "actual" recruiter field pointed from "Recruiter1".

Take Away:

SPD provides authoritative Xpath expressions for rows & columns in a data view.

Други, it shows the actual data. So for example, a column of type shows this:

<фонт><распон><A HREF="/sites/Corporate/HumanResources/TalentAcquisition/_layouts/userdisp.aspx?ID=17">Galvin, Павле</A><имг бордер ="0" height="1" width="3" src="/_layouts/images/blank.gif"/><a href=’javascript:’ onclick=’IMNImageOnClick();return false;’ class=’ms-imnlink’><img name=’imnmark’ title=” бордер =’0′ height=’12’ width=’12’ src=’/_layouts/images/blank.gif’ alt=’No presence information’ sip=’PGalvin@xxx.com’ id=’imn_77,type=smtp’/></a></распон></фонт>